Page 34 - NM Spring_2021

Billet Connection Part # 9000 Electric Oil Pump Priming System Kit

Billet Connection’s Priming system installs in the the engine block where the disposable filter screws
vehicle and at a push of a button your engine will on. The one way check valve prevents oil feeding
be primed and ready to start all while sitting in the back through the electric oil pump when the engine
drivers seat. This Kit is supplied with a steel and an is running. A momentary switch is supplied in the kit
aluminum #8 weld-on fitting. One of these fittings which will mount on the dash. To prime engine push
needs to be welded to the oil pan or dry sump tank. the momentary switch until the oil pressure gauge
The oil will be sucked out of the pan or tank through starts to move up around 15 pounds. After the gauge
the inlet fitting of the oil pump, this #8AN to 3/8" moves let go of the priming switch and push the
Steel fitting has a removable filter screen inside of it starter button. This Priming System Kit weights less
to keep any large particles from getting into the oil than 5 pounds and completely eliminates Dry Start
pump. The oil goes through the electric oil pump and Ups! The Oil Pump has a Viton O-Ring Seals and can
through a one way check valve and into the top of be used with all types of fuel and oil.
the See Through Oil Filter Assembly or other type of
remote filter or it can be plumbed directly back into Contact: Billet Connection at 509-467-7584 or
www.billetconnection.com

Three days of live, hands-on education,
information and Q & A with the Performance
Engine industry’s leading manufacturers,
suppliers and engine builders.

Online and Free to attend. Watch on our YouTube channel starting March 1st.

engineperformanceexpo.com

SPRING 2021 Nitro Madness Magazine 34